Aspen Avionics
EFD-1000 Pro PFD
The EFD1000 Pro PFD gives you all the major tools that help professional pilots fly safely and easily in instrument conditions, at a breakthrough price. The Pro has all the same great features as the Pilot PFD—integral ADAHRS (Air Data and Attitude Heading Reference System), backup battery, emergency GPS, altitude alerter—plus a whole lot more.
The Horizontal Situation Indicator (HSI) integrates a course pointer and course deviation indicator (CDI) onto your slaved compass rose, and adds two bearing pointers that you can set to any VOR or GPS waypoint, for added situational awareness (and making DME arcs a breeze to fly!). Text information about your active waypoint is right there in front of you.
Arc mode is ideal for the en-route segment, showing your own ship at the bottom of the screen, your flight plan legs ahead of you, and nearby navaids and airports around you on a moving map. With optional software, you can even overlay datalink weather graphics and traffic on the map.
The Attitude Director Indicator (ADI) shows the same accurate attitude with airspeed and altitude tapes as the Pilot, and adds more. In approach mode, you’ll have lateral and vertical deviation indicators, along with your approach minimums, right there on the ADI for a tight scan during this critical phase of flight. You’ll get an alert when you reach barometric minimums, and a DH annunciator will illuminate at AGL minimums (when connected to a radar altimeter).
The Pro couples to most GA autopilots and flight directors, through its included Analog Converter Unit (ACU). You’ll lose no functionality when replacing your mechanical HSI and ADI, and may gain some. An integral GPS Steering (GPSS) function can drive your autopilot in HDG mode through most GPS flight plan legs and course changes, and even along curved flight paths (like course reversals and holding patterns) when connected to an appropriate WAAS GPS navigator. If your autopilot supports a flight director, but your current attitude indicator doesn’t, the Pro will give you a single-cue flight director that will make your hand flying even easier, more accurate and safer. The Pro delivers all the capabilities a serious instrument pilot needs on his or her primary instruments. And if you want even more, a simple software upgrade will take the Pro up to our highest-level PFD: the ATP.
|
EFD1000 Pro All the features of the EFD-1000 Pilot, plus: * Integral ADAHRS, backup battery and emergency GPS * Integral altitude alerter/pre-select * GPS flight plan map views: 360º & Arc * Full EHSI with dual bearing pointers * Dual GPS, dual VHF nav support * Autopilot & flight director integration * Integral GPSS Roll Steering * Base map with curved flight paths * (optional) Terrain, traffic, weather overlays
|
Single Tube Panel |
|
General Specifications: Part Number A-05-110-00 Width 3.50 in. (Measured at Bezel) Height 7.00 in. (Measured at Bezel) Can Depth 4.11 in. (Rear of Bezel to Rear of Can) Overall Depth 6.21 in (Knob to Rear Pressure Fitting) Weight 2.2 lbs Display Type 6.0” Diagonal TFT Active Matrix LCD (400x760) Display Colors 262,144 Face Anti-Reflective Coated Glass Backlight High Intensity White LED Rotary Knobs Optical Encoder with Momentary Push Dimming Manual & Automatic (Front Bezel Mounted Sensor) Operational Specifications: Operating Temp: -20°C to +55°C Storage Temp: -55°C to +85°C Max Un-Pressurized Operating 35,000 Cooling Integral Fan Max Humidity 95% at 50°C Input Voltage +8 to +32 Volts DC Max Current 3.5 Amps I/O Specifications: ARINC 429 Inputs 5 Low Speed ARINC 429 Outputs 1 Low Speed RS-232 Inputs 5 RS-232 Outputs 3 Pitot / Static Quick Connect Certification Specifications: Technical Standard Order TSO-C2d, TSO-C3d, TSO-C4c, TSO-C6d,TSO-C8d, TSO-C10c,TSO-C106, TSO –C113
|
Software RTCA DO-178B Level C Environmental RTCA DO-160E Categories See Environmental Qualification Sheet RSM Part Number A-05-111-00 Width 2.50 in. Length 4.36 in. Height 0.90 in. Weight 0.2 lbs Analog Converter Unit: Weight: 14 ounces (approx.) Width (including mounting flange): 5.72 inches Height (including mounting flange): 1.60 inches Depth: 4.28 inches Input Voltage 14 Vdc / 28 Vdc Nominal (10 Vdc to 32 Vdc operational Input Current less than 0.5A at 28 Vdc Mounting: Attaches to the airframe using six #8 screws located near each corner and at the centers of the mounting flanges Interfaces ARINC-429 RS-232 Features and Specifications subject to change without notice.
|
Page Last Updated: 9/24/2007
